Slicer for fusion 360 says material is too small

SLICER FOR FUSION 360 SAYS MATERIAL IS TOO SMALL INSTALL
SLICER FOR FUSION 360 SAYS MATERIAL IS TOO SMALL MANUAL

Example 1 вЂ“ Self-watering flower pot insertДЇirst, weвЂ™ve modeled this without the use of parameters, just like youвЂ™re probably used to modeling. LetвЂ™s take a look at two examples and actually try to modify them to fit a different sized object.

ItвЂ™s really cool and if youвЂ™re not using this feature, youвЂ™re missing out a lot! If you then, later on, want to resize your model, instead of painfully changing the dimensions everywhere manually, you can simply open the parameters window, change the values here and see the model updating in real-time. For example, you can define that an edge should be вЂњ thickness*2вЂќ long. And you can even do basic math with them. You can then use these variables whenever youвЂ™re defining dimensions. If you have experience with any kind of programming, these are basically variables. In short, if you go to Modify вЂ“ Change parameters, you can define dimensions and name them. This is where parametric modeling excels. Ideally, youвЂ™d like to be able to quickly resize it to whatever size your pot is. Or a self-watering insert for a flower pot. You donвЂ™t want to re-draw it from scratch every time you buy a slightly different one. Say, a wall-mounted holder for an aluminum LED profile. And sometimes you might even want the part to fit various different sizes or types of objects. The insane thing is that these are also done automatically.ДЄmazing stuff! Anyway, donвЂ™t take it from me, make sure to get this from the Fusion App store today.But thatвЂ™s very often not the case, right? Mechanical parts usually need to fit perfectly with other parts. Putting the parts together in the end is made simple due to automatic part labelling, butВ nothing makes it easier than the animations Slicer produces.

SLICER FOR FUSION 360 SAYS MATERIAL IS TOO SMALL MANUAL

When you select that winning design, you can create DXFвЂ™s to use as true scale stencils for manual operations, orВ you can take themВ to Fusion 360 to create toolpaths for your laserВ or waterjet. Built in are DYNAMIC checks to ensure that parts are connected and that interferences are avoided as demonstrated by theВ red pieces in the gif below: With Slicer for Fusion 360, you can explore different construction techniques to captureВ design intent, limit material use, or explore stock selection and finish. From there, to take your models from Fusion to Slicer, all youвЂ™ll need to do is hit the 3D Print buttonвЂ¦ Once thatвЂ™s done, you can then add it as a вЂњcustomвЂќ selection from within the 3D print command.

SLICER FOR FUSION 360 SAYS MATERIAL IS TOO SMALL INSTALL

First, youвЂ™ll need to get and install it from the App Store. Step 1 is to get this tool to work seamlessly with Fusion 360.

These,В when teamed with Slicer for Fusion 360,В will allow you toВ make incredible and complex designs.В Built upon the 123D Make technology, this tool enables you to produce 3D products by slicing the models in a plethora of ways. More likely, youвЂ™ll find a bandsaw, jigsaw, or even a hand saw. IвЂ™d also guess that mostВ of you donвЂ™tВ have a CNC inВ your garageвЂ¦except for CurtВ of course. IвЂ™d venture to guess that allВ ofВ you knowВ that design is just small part of producing real products.

Slicer for fusion 360 says material is too small